Fortu Tech specializes in manufacturing FS-85 alloys (Nb-28Ta-10W-1Zr) products.
| FS-85 alloys Regular Product Nb-28Ta-10W-1Zr alloys | ||
| FS-85 Foil | FS-85 Wire | FS-85 Sheet |
| FS-85 Rod | FS-85 Targets | FS-85 Tube |
| FS-85 Pellet | FS-85 Fasteners | FS-85 Ingot |
FS-85 (Nb-28Ta-10W-1Zr) is high-strength niobium alloy with a density of 10.61 g·cm-3 .
Melting point of FS85 alloys is 2592℃.
The recrystallization temperature of FS85 alloys is 1093~1371℃.
FS-85 alloys (Nb-28Ta-10W-1Zr) has quite high tensile strength, creep strength and fatigue strength at 1300~1600℃.
| Chemical Requirements FS-85 / Nb-28Ta-10W-1Zr alloys | |||||||
| Element | W | Ta | Zr | C | O | N | H |
| Content Maximum % | 10~12 | 26~29 | 0.6~1.1 | 0.01 | 0.03 | 0.015 | 0.001 |
If you have inquiry or want to discuss your design with us, please write email to us.
We will reply your email within 24 hours.
| Mechanical Properties at Room Temperature FS-85 / Nb-28Ta-10W-1Zr | |
| Modulus of Elasticity | 140620 MPa |
| Tensile Strength | 604.7 MPa |
| Yield Strength | 485.1 MPa |
| Elongation | 22% |
| FS-85 / Nb-28Ta-10W-1Zr | |
| Temperature | Creep Stress for 1% creep in 100 hrs |
| 1000°C | 148 MPa |
| 1100°C | 100 MPa |
FS-85 alloys (Nb-28Ta-10W-1Zr) is used in manufacturing high-temperature components.
FS-85 alloys (Nb-28Ta-10W-1Zr) is widely used in aerospace industry. It are used to manufacture rocket nozzles, engine components, gas turbines blades, turbine disks, air heater, combustion.
Add: 399 Chunhe Road, Baoshan District, Shanghai, China, 200941
Tel: +86 21 56656030
Email: info@fortu-tech.com
